General-machine-products 7/8" Break-Away Swivel Bedienungsanleitung PDF herunterladen

7/8 in. Break-Away Swivel

Disassembly Procedure

The following disassembly operation will deal with

small parts. Disassembly and re-assembly should be

done in an area where parts will not be lost if acci-

dentally dropped.

1. Retrieve both halves of the broken swivel.

2. Loosen the #6-32 x 1/4 in. set screw located in the

swivel body with the 1/8 in. Allen wrench provided

and back it off 2-3 turns.

3. Unscrew and remove the remnant stud of the

broken tension bolt.

4. Unscrew the stationary body where it joins the

housing and remove the head of the broken tension

bolt and the five thrust washers.

5. Place the five thrust washers on a new tension bolt

of the desired tension value, making sure to follow

this sequence: steel, plastic, steel, plastic, steel. Now

check to see that every other washer is steel.

6. Replace the O-ring (if missing) where the swivel

body mates with the housing.

7. place the new tension bolt with washers through the

housing and screw the bolt into the swivel body.

IMPORTANT: Do not over tighten the tension bolt,

because premature fracture may occur. Tighten the

bolt lightly until it bottoms (don't use excessive

force) ... then, unscrew 1/2 turn to achieve proper

bearing clearance and swivel action.

Do not apply torque to the head of the

tension bolt as over-stressing the bolt may

cause a lower breaking point.

8. Re-tighten the set screw into the side of the swivel

body.

9. Screw the stationary body and housing together and

tighten.

Questions? Comments? Call us!

We want you to be completely satisfied with cable

placing products you get from GMP.

If you have a problem or need additional information,

please call us at 1-800-345-6009 (in AK, HI, PA and

outside the USA: call 1-215-357-5500 Ext: 251) from

8:00 AM to 5:00 PM EST on any USA business day;

you can also send us a facsimile message any time at

1-215-357-6216. We would be happy to help!

1 2

7/8 in. Break-Away Swivel 1

Inhaltsverzeichnis

Seite 1 - 7/8 in. Break-Away Swivel

7/8 in. Break-Away Swivel Disassembly Procedure The following disassembly operation will deal with small parts. Disasse

Seite 2

7/8 in. Break-Away Swivel IMPORTANT NOTICE Users are cautioned to ensure appropriate saf

Kommentare zu diesen Handbüchern

Keine Kommentare

General-machine-products 7/8" Break-Away Swivel Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware General-machine-products 7/8" Break-Away Swivel herunter. General Machine Products 7/8" Break-Away Swivel User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware General-machine-products 7/8" Break-Away Swivel